Questions & Answers for: Mazda MX-6 removing glass

...If it is less than 1-2 years old save and reuse it. 3.remove any parts that may be in the way of removing the rad and fan. 4.disconnect the coolant resorvoir hose at the rad cap and remove

replacing hydraulic master cylinder in a 1997 mazda protege I've got it loosened from under thehood but how am I suppose to get it from the inside? there is nothing to loosen on the inside, just the ...

fitting a clutch to mazda mx6 2.5v6 1993, do you have to remove the engine? It's easier to remove the engine but if you have a hoist and good gears you might get away without removeing the whole ...

need instructions on how to change it i need to change a air flow sensor in a 1993 mazda mx6 please forgive me if the images do not show up. please do not forge to rate and comment about your ...

how to install my back windshield in a mazda mx6 93 Easer said than done! First remove all the window trim from the inside of the car remove all outer window mouldings. Next take your special tool ...

I have a Mazda mx6 and the aircon won''t work. please can anyone help thanks. what won't work? the interior fan or is all else well except the cooling part? if the compressor does not come on, then ...

how to remove the starter on mazda mx-6 gt, can it be done w/o removing the intake manifold? yes but you do have to pull the brace that connects to intake ,exaust ,an trans.

how many bolts is holding the starter on a 1994 mx-6 mazda 3 bolts the one you can't see is in back of the starter solenoid. Bolt's are almost at a triangle pattern. Disconnect the negative battery ...

How to change transmission oil on a mazda mx-6 manual 1.remove speedometer driven gear 2. remove drain plug, and drain oil 3. fill trans, check fluid by speedometer gear, just above gear see F & L

I have a 1994 mazda mx6 that has 1/2 of the key broken off in the key cylinder and cannot remove it. What all do I have to remove to get the cylinder out to replace it. I removed the steering wheel ...