Questions & Answers for: remove windshield wiper arm 1997

Question about 1992 LeSabre

1 Answer

...windshield under the hood ...remove the drivers side wiper arm and see if the motor is completely turning...if so check the connector arm is on and tight..the pivot ball may have worn oblong...or it ...

Ad

...windshield wipers stopped working. I can hear the motor turn on when I twist the knob, but they won't move. Your wiper linkage has come apart or broke, you will have to take shroud on top of wipers ...

Ad

...windshield wiper does not work. It is on a 1985 Buick LeSaber Collector'd edition. is the wiper itself spline drive stripped out or is it simply not connected properly ? also under the hood and under ...

Question about 1997 LeSabre

1 Answer

remove the air inlet screen Disconnect the windshield washer fluid hose(s) Disconnect the wiper arm transmission drive link from the crank arm using a suitable wiper transmission separator tool. There

Question about 1997 LeSabre

1 Answer

so that wiper arm aligns with marks placed on windshield. Press arm assembly on shaft and push retaining latch IN. Connect washer hose. Remove windshield markings and check wipers for proper operation

...windshield wiper motor on my 2000 buick lesabre If the wiper motor keeps running even with it shut off the motor assenbly has to be replaced. unplug the wiresand remove thebolts that holdit to the ...

Question about 1997 LeSabre

1 Answer

...wiper arm...try to tighten...BUT FIRST be sure the wipers are in the off...and down position...you can verify this by turning them off while your Lesabre is running...If tightening them both does not ...

...windshield wiper stopped working. They said that it started making a noise, turned them off and then back on. Driver side works, but passenger side stays down. Could this be the motor or the arm ...

My 95 Buick lesabre windshield wipers do not clean the whole windshield. Already changed the motor and tried adjusting the arms. Cleans a small section. Change the rubber wipers and call it the day.

...Remove the windshield wiper pivot arms. Remove the cowl top vent panels. Disconnect the windshield wiper mounting arm and pivot shaft. Remove the access cover from the dash panel. Remove the mounting ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...