Questions & Answers for: Timex Expedition remove watch winder

...watch and remove its battery. Keep this battery out for 10 sec. than reinstall at place. The prob is due to any static charge got remain in watch during manufacture lovely watch i love it very much ...

...REMOVE BACK COVER ON TIMEX EXPEDITION WATCH If caseback is without grooves, it is snap on caseback and you have to insert openers blade under the lip and pry up. Lip is the tiny gap between the case ...

...Your problem may be that the back MUST be replaced in exactly the same orientation as it was removed. On mine the lettering on the back must oriented so as to read with the top at 12 O'clock. ...

...watch. Remove the 3 very small screws that hold the battery in place. Remove the battery from the battery holder. The piece that the 3 small screws were removed from seperates from the 3 volt 2016 ...

...remove the screws. It is a new watch that does not need a battery at this time. I am just looking to the future when a battery will be neded. Thank you, for any assistance you may give me in this ...

...remove the back to replace the batt in a timex exped Take your watch to your nearest watch shop and ask them to do it for you. You can get into difficulty replacing batteries and it is not worth the ...

...remove the back? The timex has a press fit back with an O ring to seal it. You really need a special tool which is like a large coin with a thin but strong edge that doesn't bend, or you can use a ...

...remove back watch cover If the watch back has about 10 groves on it take it to a watch repairer.NO groves then a sharp knife like a small Pearing knife find the grove between watch and cover put ...

...Remove the back of the watch by using a watch back removal tool or a small flathead screwdriver to gently pry it off. Take out the old battery and discard it properly. Take the new battery and orient ...