Questions & Answers for: remove towel bar set screw

Question about YB2818 Eva Towel Bar Bathroom Accessory - Brushed Nickel

2 Answers

...remove the towel bar wall bracket to see what is going on. I have tried to remove the Moen Eva towel bar from the wall using a flat head screw driver inside the slot (not a set screw) on the bottom ...

Ad

remove towel bars and hooks from wall. No set screw visible. We did not install them. Newer towel bars don't have set screws... Solution-slide off! There is an opening in the bottom of the bracket

Ad

Question about 24 In. Towel Bar...

1 Answer

...towel bar, I can remove the set screw and nothing comes loose to attach it to the wall. What am I missing ? Sorry to read about your problem, I hope this helps you out. remove the setscrew.. your ...

Question about YB8086 Mason Towel Ring Bathroom Accessory Chrome

1 Answer

...remove a Moen towel bar. It has a tab under the bottom but I dont know what to do There should be a "set-screw" (a very small screw) at the bottom of base (fat part) of the towel bar. It screws in to ...

Question about YB2818 Eva Towel Bar Bathroom Accessory - Brushed Nickel

2 Answers

...remove a Moen Brantford towel bar from the wall. it does not have set screws but appears to have some type of slot/clip arrangement. it is a brushed nickel 18 inch bar. The only one I can find that ...

Question about 24 In. Towel Bar...

1 Answer

...remove a towel bar that does not have a set screw on the flange cover? I think you grab hold of the rosette closest to the wall and spin it off, it should expose the set screw. If that isn't it, one ...

Question about YB2818 Eva Towel Bar Bathroom Accessory - Brushed Nickel

1 Answer

...you remove the eva towel rack holder The Moen YB2824 is attached to the mounting bracket with a set screw through the base. You would simply need to loosen this set screw to remove item from the

Question about YB2218BN: Brantford 18 in. Towel Bar in Brushed Nickel

2 Answers

...towel bar is fairly easy. Use a small flat screwdriver that fits in the hole, and lever the tab towards the wall. There is a screw underneath that can be tightened and if that works, you're done. But ...

...remove a towel bar with slot in bottom no set screw There is no screw here. Insert a small flat screwdriver -- small enough to fit fully in the hole -- and pivit it up, so that the tip presses toward ...

...remove towel bar end brackets. They are white plastic with no set screw. It looks like you may be able to just slide the bracket up, but I have a hunch there's a hook or clip in there somewhere that ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Home Experts

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...