Questions & Answers for: remove timing chain

...Remove the timing chain/belt. Installation NOTE: Ensure that the timing marks on the camshaft sprockets (6256) and the seal plate are properly aligned. Ensure that the timing marks on the crankshaft ...

...Remove the timing chains from the camshaft sprockets.Remove the right and left timing chains and the crankshaft sprocket from the crankshaft. CAUTION: The bolts are different lengths and must be ...

Remove timing chain tensioner bolts. Remove the timing chain, timing chain tensioner and camshaft sprocket at the same time. Remove the crankshaft sprocket using special tool J 22888-20A or equivalent

...Remove timing cover. See TIMING CHAIN COVER (NON-SUPERCHARGED). Remove the variable camshaft timing oil control solenoid. Remove the variable camshaft timing oil control unit housing retaining bolts ...

Remove the timing chain cover bolts both from the front to the block and from the bottom to the oil pan. Remove the timing chain cover. Loosely install the crankshaft pulley. Compress the timing chain

...Remove the timing (front) cover from the engine. Lock the shoe on the automatic adjuster in fully retracted position by depressing the adjuster lock lever. NOTE: To remove the timing chain, it may be ...

...Remove the timing chain cover. NOTEBe careful not to damage the contact surfaces of the cylinder block, cylinder head and timing chain cover. Before removing the timing chain, mark the right and left ...

...Remove Timing Chain Cover and Seal on Toyota Previa? http://technoanswers.blogspot.com/2011/12/how-to-remove-timing-chain-cover-and.html--------   How to Remove Timing Chain and Gears on Toyota ...

...Remove timing chain cover as follows: Remove crankshaft pulley bolt. To lock crankshaft pulley, use special tool 09917-68221 (camshaft pulley holder). Be sure to use the following bolts instead of ...

...Remove timing chain cover as follows: Remove crankshaft pulley bolt. To lock crankshaft pulley, use special tool 09917-68221 (camshaft pulley holder). Remove crankshaft pulley. To remove crankshaft ...