Questions & Answers for: how to remove the spray arm on a maytag dishwasher

...spray arm with a toothpick, and rinsed out all the debris. From then on, I used CLR every two months or so, adding recommended amount at the time of the cycle it recommended on the bottle of

spray arm?? dont remove them they only protect from hitting against heate and melting. should be a center thumbscrew in spray arm loosen that nut and should come right out, pokin with wire or toothpik

...and I poke them back in. Is the spray arm removable and cleanable by an amateur or do I need a pro? Bill of Carmel Yes remove the arm ,if its the lower arm it un screws,the upper arm snaps on&

...so you can access the lower arm. Does it spin freely? If not, remove and clean the rotating point. Make sure the spray nozzles are not clogged and there as no chunks of stuff inside the spray

...the washer. The screen is under the lower spray arm shroud. Hi, There should be a plastic nut holding the spray arm. Remove the plastic nut and the spray arm should release. Does this help you? ...

...spray arms and filers under the torx screws. I have removed and cleaned down to the Filter and rinse arm assembly but have not taken off the motor or the three bolts to remove the disc. All of the ...

...you will need to remove lower spray arm and then using torx driver remove the screws holding the housing together and remove the housing to get to the debris underneath. Good luck and hope this

remove the bottom spray arm? Hello Unplug the dishwasher. If you cannot access the plug, turn off the dishwasher's circuit breaker in the electrical circuit breaker box to stop electrical power to

...spray arm doesn't spin I've removed the arm and cleaned out all of the holes where the water comes out. It seems like the spray arm is off balance because it's tilted and one end of the arm is ...

it freely, it spins like a top. .... You may not post new threads; You may not post replies; You maynot post attachments; You may not edit your posts. How do i remove the lower spray arm of my Maytag