...spare tire under tank just remove out of the way, also disconnect the battery to avoid any type of sparks when working around fuel fumes, actually not to hard of a job , just usually dirty and time ...
...Spare tire assembly The winch jamb, I removed it from the truck. I can't get it to wind up or down. Can I take the unit appart? The unit is sealed, a new one is cheap, this is an all to common issue ...
...remove spare tire and on the crossmember above it,left side, there is a fuel pump drive module. Mine was corroded and got moister in it .replaced it and runs fine. dealer price 110.00 dollors Check ...
Question about 2005 F-150
...remove the cover, and expose the fuse panel ( with the cover on ) and the fuel inertia switch towards the front of the truck. The other thing to check ( after trying the fuel inertia switch ) is the ...
...tire ( need to drop the spare to see if ). There is an issue with 04-07 ( 04-06 ?? ) MY trucks where the FPDM is bolted directly to the cross member, and dissimilar metal corrosion happens and builds ...
should match the holes on your truck without removing bumper or spare. ( you might have to temporaly remove/ lower them to install the hitch, but you can put it back on without any modifications) Luck
...the circuit board inside. Lower the spare down and take a look at the box it is pretty easy to remove and inspect.If you see cracks or decayed pieces of aluminum. it is probably no longer any ...
...spare tire and remove and inspect the FPDM. My 2006, the casing was cracked, but I am sure the PCBoard was next if I had not installed the new one with the stand offs. Aside from the visible crack, ...
...remove cable from spare tire...Set parking brake while in park and use the lug nut removal tool to break loose the lug nuts before raising vehicle..They are removed counter clockwise..Don't take nuts ...
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions
