Questions & Answers for: Chevrolet Blazer remove rear wiper arm cap

Question about 1999 Blazer

1 Answer

...rear hatch, remove this screw. Now, in the strap that you use to pull the rear hatch down, there is a torques head screw, that holds this strap to the rear hatch, you need to remove this ...

Ad

...of the wiper arm and ther is a 13 mm nut that holds the wiper arm on . Remove the nut and then use a wiper arm puller if you have one or just wiggle the wiper armup and down untill it comes loose

Ad

wiper arm at the cowl of the Blazer. This will reveal the bolt that secures the wiper arm to the wiper linkage. Unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as

Question about 2001 Blazer

1 Answer

...remove wiper arm Hello my name is Ben. If you look closely at the end of the arm, you will notice there is a cap, use a tiny screwdriver to pry that cap up, then you will see a nut that needs to be ...

Question about 1997 Blazer

1 Answer

...remove the cap of the arm so I can either tighten the bolt or determine if it is stripped? the blade just lift's off the wiper drive shaft if its sliping around there is a good chance its striped the ...

Question about 1997 Blazer

1 Answer

...Rear To Remove: Put the wiper arm in the park position. Remove or disconnect the following: The washer hose from the connector The cap from the wiper arm The nut from the wiper arm The wiper arm from ...

...remove-chevy-blazer-windshield-wipers.html#ixzz1B4pQJ39h 3 Pull the wiper arm up at the blade so that the blade of the wiper is pointing into the air. Then pull at the base of the arm, wiggling it ...

Question about 2001 Blazer

1 Answer

First check to see if it has a cap at the base of the arm, if so then remove the cap there should be a nut, move the wiper arm into posistion and tighten the nut real snug. You should be in good shape

Question about 2001 Blazer

1 Answer

...wiper arm at the cowl of the Blazer.This will reveal the bolt that secures the wiper arm to the wiper linkage.unbolt the wiper arm using a 3/8-inch ratchet and socket. Place the bolt to the side, as ...

Question about 2004 Blazer

2 Answers

rear wiper rotates around car wash damaged my rear wiper , motor runs, blade was moving back and forth missing the glass then we tried to change the blade, and now wiper arm moves toward ground, does ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...