Questions & Answers for: GMC remove rear wiper arm cap

Question about 1998 Safari

1 Answer

...rear wiper arm removal I switched out the rear hatch with an older model that does not have a module for the wiper motor so I have to switch motors to keep the wiring compatible.My problem is I cant ...

Ad

Question about 1999 Suburban

1 Answer

...wiper motor to remove and replace. Thanks Yes you must remove the arms, to do so, just use a standard screw driver to remove the caps covering the arm securing nuts on the arm drive shaft. The arms ...

Ad

Question about 2006 Yukon Denali

1 Answer

Remove wiper blade I cannot get the wiper blade off my 06 Yukon Denali. How do i remove it?? Do you mean the wiper blade or the wiper arm? The wiper blade should have a small tab or lever on the ...

...wiper does not move when you turn them on. It moves freely by hand but the insides won't grab. Remove PLASTIC CAP at Pivot end of arm Remove THE NUT You SEE There USE HIGH GRADE LOCK-TIGHT on threds ...

...remove the cover over the wiper motor on the driver side of the car. Remove the retaining nuts under the little caps that hold the arms on, put a pry bar under the bottom of the arm and hit the stud ...

...wiper is lose, how do i tighten it up remove small black plastic cap from bottom of wiper arm, under the cap is a nut. Tighten it, make sure your wiper is in the correct position, or you will have to ...

Question about 2008 Acadia

1 Answer

...rear wiper blade on a 2008 gmc At the mounting area of the blade to the rotating wiper arm is a tab that has to be pushed in and held to remove the wiper blade. The tab will be on the wiper blade's ...

...wiper arm is held on with a 13mm nut. with the wipers off, remove the plastic cap on the nut, and simply tighten this nut,(with the arm in thecorrect position, you should be able to move the arm by ...

Question about 1999 Yukon

1 Answer

Remove wiper arms. Remove weatherstrip from cowl. Remove two cowl vent grille panel screws. Remove windshield nozzles and hoses. Remove three cowl vent grille panels. Disconnect windshield wiper motor

...REAR WIPER MOTOR, THEN REMOVE THE TWO MOUNTING BOLTS SUPPORT WIPER MOTOR WHILE REMOVING BOLTS.THEN INSTALL NEW WIPER MOTOR AND PUT EVERY THING BACK IN PLACE VISA VERSA. It is located right on the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,225 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...