Questions & Answers for: Lexmark remove rear door cards

Question about C760 Laser Printer

1 Answer

...Remove the rear cover Remove the fuser top duct screw and disconnect tab Remove the top duct Remove the redrive belt cover duct Remove fuser left duct Remove fuser bottom duct Swing lever and ...

Ad

Question about C760 Laser Printer

1 Answer

how do I change the waste toner bottle Looking at the printer from the rear, you will see a door the right side of the printer in the bottom corner. Open this and the waste toner bottle sits behind it

Ad

...rear door of the C510 to clear a paper jam How do you open the rear door of the C510 to clear a paper jam? Hi I hope you have this solved already... but you just grab the edges and pull from the top ...

door is open then remove the photoconductors one by one make sure not to touch the surface of the photoconductors also make sure not expose them to light for a long period of time. Once you remove the

...remove the rear cover. Check the connector JFUSER1 for proper connection to the system card, the cable for pinch points, and the cable or connector for any other damage. Is the cable damaged? If yes, ...

...rear door. what do I do? Here's an article in the Lexmark website that will guide you on what to do when having that kind of problem. Just click on this link: http://bit.ly/9dXHBa. Read the ...

Question about C510 Laser Printer

1 Answer

door. 3 Remove all of the toner cartridges one at a time. 4 Open the top door. 5 Remove the photodeveloper cartridge. 6 Pull on the tabs to lift the lens cover. 7 Gently wipe the printhead lens in one

Question about C524 Laser Printer

1 Answer

...remove the rear cover. Check the connector JINT1 (5 V interlock switch cable) for proper connection to the system card, the cable for pinch points, and the cable or connector for any other damage. Is ...

Question about C534N Printer

2 Answers

remove the rear cover. Check the connector JHVPS1 for proper connection to the system card, the cable for pinch points, and the cable or connector for any other damage. If you're not sure on how to do

Question about C510 Laser Printer

1 Answer

...rear door. You will need to replace the transfer roller if it's broken. Please call our Technical Support Hotline for further assistance. Alternatively, you can contact any of our Authorized ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...