Questions & Answers for: Toyota Sienna remove rear door cards

...remove the rear latch lock, 3 T30 torks bolts. Unsnap the cable from the 2 retaining clips and slide the power door assembly out the bottom of the door. Reverse assembly for the new one. Id imagine ...

...for $40. keywords: 2001 2002 2003 2004 2005 2006 2007 Toyota Sequoia Metal Lift Gate Exterior Door Handle for Rear Outside Van Tailgate Handle. You need to remove the back door panel to replace

the two cover bolts in the rear of the vehicle,but for some reason the cover still seams to be stuck in place.any suggestions? you have to open the rear hatch and remove the cover from behind the door

...rear door handle you will need to take the door card off of the door, peel back the plastic cover thats on the door, you will need to unscrew the actual door latch should be three screws from the ...

...with the Sienna, I had to remove the panel on the inside of the rear door and found the other side of the handle. If you need to fix it? ...

rear doors on my Toyota Sienna will not open either from the inside or out. Suggestions? The same thing happened to us. We have a 2000. The fix is easy, sort of. From the inside of the van, remove the

...rear door of our 2001 Toyota Sienna Van broke and we cannot open the door now. There does not seem to be a manual latch or button inside the car to open the door. Please let me know how the door can ...

...rear hatch latch assembly. Nothing more but a simple thin lever line leave spring that contacts the ground pole to tell body ECU the door is opened. The spring is so thin that it bent out of shape ...

...rear door seal leaks also. Test it buy placing a hose without the nozzle on the roof facing the closed door. Turned it full on. Remove trim at bottom of the door ( i also removed all the carpet and ...

Rear door handle snapped off. Can't figure out how to access the exterior handle mechanism remove the inside trim card-there's a pull handle with bolts or screws remove those then the rest pops ...