Questions & Answers for: Lexmark remove rear door cards

...rear door off, then remove the 2 screws on the rear output cover. 2 tabs hold the top of the rear output assembly to the printer itself. once that is off, you'll be looking at the fuser. there is a ...

...rear paper door with no apparent jam. We also can't run check stock through it without a jam after the second page. Any help would be appreciated. You need to change the paper type when using card ...

...Avoid touching the internal components of the product. Disconnect the power cord from the back of the product. Remove the rear door. Push in the two release tabs, and then pull the door toward

...rear door" i have opened door removed paper jam, unplug printer turned it off and on, opened allthe doors removed the toner cartrege and it still has the same error code and we cant use the printer. ...

...jam open rear door There is no paper jamming in the rear This issue may have been caused by a fuser problem and the rear door assembly. Please try to contact Lexmark's technical support

...remove the rear cover. Check the connector JINT1 (5 V interlock switch cable) for proper connection to the system card, the cable for pinch points, and the cable or connector for any other damage. Is ...

...is in the back to get to fuser remove rear door remove redrive two screws you will see the fuse be carful output sensor in middle of fuser just pull it gently if it jams again may need a new ...

...remove rear door and the redrive unit. ( two screws on back of printer and press in two levers on upper portion of back to remove) either the switch on the left of the fuser is stuck or the ...

...rear door of Plat pro 905 to clear a jam...now door won't go back in. I've done this lots of times...first time I've had his problem. Any ideas please see any breaking in the back side door or check ...

...Remove the top rear door 03: Open the fuser cover 04: Remove the fuser 05: Remove the new fuser from the packaging 06: Insert the fuser 07: Close the fuser cover 08: Attach the top rear door 09: Lift ...