Questions & Answers for: remove rear axle ford explorer

Remove the rear brake disc (2C026). For additional information, refer to Section 206-04 . CAUTION: Turning the differential case (4204) or an axle shaft (4234) with the differential pinion shaft (4211

...1997 ford explorer awd how do I disconnect the left rear axle on a 1997 ford explorer awd in order to replace bearing and seal? You have to take the rear differential apart, and then pull the

...rear wheel bearing 2002 ford explorer 4x4 drivers side got pictures you must remove brakes, then remove axle nut, then remove upper control arm and finally tie rod stabilizer, remove axle from car ...

...remove them ? not knowing which axle you have makes it hard to give you a for sure answer but I'll try ,, the bearing in the rear end are either pressed onto the axles or into the housing,, so not ...

...Remove rear cover 3. Undo cross pin bolt and slide the cross pin out of the carrier 4. Push axle shaft in so you can remove the C clip axle retainers 5. Slide axle out of housing. 6. Remove axle seal ...

I need to replace a rear axle seal on a 98 ford explorer. How do I remove the rear axle? Unbolt it,bolts on end of housing

remove rear cover look for the clips you can remove then your fingers although there is an O ring on shaft as well it acts as a preload for clip you should replace after removeing axle other then that

...Remove the rear disc brake rotors (2C026); refer to Section 206-04 . CAUTION: Once the differential pinion shaft (4211) has been removed, turning the differential case (4204) or an axle shaft (4234) ...

...remove the rear axle wheel barring ? it's been my experience that a socket and ratchet only works it it comes off smoothly, not often. a puller is the best way to go especially if it is hard to ...

explorer rear axle removal are there any tips to aid in the removal of the real axle from the differential YOU NEED TO LET GARAGE FIX BECAUSE YOU NEED A PRESS TO PRESS WHEEL BEARING OFF THE AXLE SHAFT