Questions & Answers for: ASUS how to remove pin

Question about NCT-D (90MSV430G0UAY) Motherboard

1 Answer

...of the CPU heatsink/fan the system will power on. When I release pressure, system shuts down. I removed heatsink/fan, removed old thermal grease using Isopropal alcohol. I removed CPU, checked ...

Ad

Question about P5S800-VM Motherboard

2 Answers

...pin connector. To do this (remove the wire from a case connector & replace it to function as a two pin connector). Find a large needle. On one side of the plastic pin connector you'll see a piece of ...

Ad

Question about K8V-MX Motherboard

1 Answer

...1 pin connect jumper over both pins remove jumper refit over 1 pin and reboot If 3 pin setup remove jumper and fit over middle pin and the one it was not on replace back to how it was and boot ...

Question about K8V-MX Motherboard

1 Answer

...pin 2. Remove the jumper and place over pins 2 and pin 3. Doing this will clear the bios and will reset all bios settings to DEFAULT. Grab a small flat- head screw driver. Gently insert the screw ...

Question about P4V8X-X Motherboard

3 Answers

...is to clear thr RTC Clock in CMOS. You can do this in one of 2 ways: 1) Power the computer OFF. 2) Remove the power cord. 3) Hold the power On switch for 10 seconds. (This bleeds the capacitors in ...

Question about P5P800S Motherboard

1 Answer

...remove computer cover 4. find on motherboard pins named "chassis signal", this name can be inacurate as it changes slightly with revision. These pins are located just above SATA 1 (bottom socket), ...

Question about P5GC-MX/1333 Motherboard

2 Answers

pin. Remove the jumper and set it again as it was by default. The Motherboard should now be reset to factory settings, and th password will be gone Remove the small battery for the bios settings. It's

Question about Eee Box B202 PC Desktop

1 Answer

...pin jumper by the battery. Lets say that the jumper is on pins 2 and 3. Remove the jumper while the machine is OFF and place onto pins 1 and 2. Power on your machine for a minute. (Note: Your system ...

Question about P4B533-VM Motherboard

1 Answer

...pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left pin. Make sure to turn the PC off before opening the ...

Question about M51Ta-X1 NoteBook

1 Answer

...pin. e.g. if the jumper joins center pin to left pin, then remove it and join center pin to right pin. Now wait for a few seconds and then again remove the jumper and join the center pin to left

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top ASUS Computer and Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...