Questions & Answers for: remove moen towel bars

...remove the towel bar from the wall? My contractor installed a 24" Rockland towel bar. I now want to remove it so that I can paint the wall. I can't find the instructions, and I can't remove the towel ...

...remove the Moen Eva towel bar from the wall using a flat head screw driver inside the slot (not a set screw) on the bottom section of the towle bar bracket. I was told by Moen to insert the flat head ...

...Towel bars usually have a base that attaches to the wall with a screw. To expose the screw, you must loosen and or remove a small screw on the underside of the mounts. Once the screw is exposed just ...

...remove My Brantford towel bar is loose. How do I remove from the mounting posts to tighten? There are some tiny screws under the posts. Loosen them and lift the post off of its mount. There is no ...

...Moen towel bar to paint my bathroom. Is there a special tool needed to remove it? Please help. First off you need to pry off the cap thats facing you (most models). Then there should be a little hole ...

...MOEN Gilcest towel bar, I can remove the set screw and nothing comes loose to attach it to the wall. What am I missing ? Sorry to read about your problem, I hope this helps you out. remove the ...

...remove a Moen towel bar. It has a tab under the bottom but I dont know what to do There should be a "set-screw" (a very small screw) at the bottom of base (fat part) of the towel bar. It screws in to ...

...you remove the eva towel rack holder The Moen YB2824 is attached to the mounting bracket with a set screw through the base. You would simply need to loosen this set screw to remove item from the

Can't get the Moen Eva towel ring fixture to release so I can move it. check underneath for a small setscrew. back this out and it should be removable

...Moen wall anchor that is loose and will have to be replaced. Remove the screw entirely and remove the plastic wall mount. Now, remove the metal wall anchor. This may take some throught -- you don't ...