Questions & Answers for: Mercedes-Benz C230 remove maf

Question about Mercedes-Benz C230

1 Answer

...or something sucked up into the air intake for the air cleaner assembly. The MAF Sensor can be removed from the MAF housing and cleaned using carburetor cleaner in a spray can to clean off the ...

Ad

How do you remove the rear seat in a 2002 Mercedes C240? please check below the rear seat you can see small plastic cover have fitted near seat it's same color of your interior carefully remove that ...

Ad

Question about 2007 C230 Sedan

1 Answer

Hi, I own a MB C230 Kompressor 1999 (123,ooo miles).Two days ago, check engine light came on. DTC was P0170 (fuel trim malfunction bank 1. I took out the MAF sensor and cleaned it using MAF sensor ...

Question about 2007 C230 Sedan

1 Answer

p0101 Basically this means that there is a problem with the Mass Air Flow (MAF) sensor or circuit. The PCM detects that the actual MAF sensor frequency signal is not within a predetermined range of ...

...1998 c230 water pump replacement REPLACE WATER ALL YOU NEED TO DO IS DRAIN THE COOLANT SYSTEM.REMOVE THE ENGINE COOLING FAN AND CLUTCH THEN THE FAN SHROUD.REMOVE ENGINE COVER IF EQUIPPED.THEN ...

06 c230 sports mercedes code p0300, p0301, p0304 I was driving mi car on the high way and then nitice that i lost speed the check engine light was flashing then went solid and till i got home. turn ...

my 2005 mercedes benz ml350 is giving code po410 O2 sensor, Catalytic convertor, MAF sensor.

...maf sensor position there are just clips to remove (if they were replaced after last service) if not just gently pull from pipe ,make sure replacement is put in the right way ...

Question about 2004 C230 Kompressor

1 Answer

replace maf sensor Your stated "problem" is not very descriptive. Are you asking IF you should replace the MAF sensor or are you asking HOW you do it? My first question would be why you are replacing ...

...manual. The reason in why you must evacuate the a/c system with an a/c machine before you can remove the heater core is because the evaporator is located inside of the heater core box assembly. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...