...remove and clean mass air flow sensor. you can buy the cleaner at any auto parts store. but be carefull of the inside of sensor, follow directions on can. this should help a lot!! When your catalytic ...
remove or inspect the maf sensor and egr valve on a 1995 chevy blazer im not mechanically inclined so the more precise the better..thanks to check the egr valve take some vacum hose had hook it to the
...MAF cleaner. The other thing to is the 1995 4.3 is know to have the EGR valve getting sluggish due to carbon build up. Remove the EGR valve and use Carb cleaner on it to remove the EGR valve and ...
...MAF - Mass Air Flow sensor is located in the intake tube between the air cleaner and the intake. MAP - Manifold Absolute Pressure should be attached to the firewall on the passenger side. Follow the ...
...remove the MAF. Note it's uncommon for the MAF sensor to go bad and 95% of the time, cleaning it with MAF sensor with MAF cleaner will fix any problem it may of had to trigger the DTC codes. Start ...
...Remove the IAC valve and the MAF sensor and clean both with MAF cleaner...pay particular attention to the IAC...spray it liberally and wipe it in a downward motion trying not to turn the ...
...MAF is accessible from the air filter housing. Remove the air filter and look into the big pipe toward the engine. The sensor sticks down into the airstream. Use a spray can of electric parts cleaner ...
...MAF sensor cleaner...remove all carbon, spray liberally on spring and pintle and inside pintle access, do not touch with bare hands, wear rubber gloves and wipe pintle in a straight forward movement. ...
...remove one spark plug at a time (take a picture with your phone and label that picture for later) and lay it on tiop of the engine (away from the cylinder hole it came out of) and start the motor. ...
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions
