Questions & Answers for: GMC remove maf

remove (MAF) Mas Air Flow sensor,(be sure key is OFF) so you don't set a trouble code when disconecting wire conector, with some throttle body/air intake cleaner from the outlet side of MAF, spray the

Ad

Question about 2004 Sierra Denali

3 Answers

Diagnostic codes? can anyone tell me what P0101 code indicates specifically? it says Mass or Volume Air Flow Circuit Range Proformance the guy at the auto parts store said the dealership would tell me

Ad

...MAF (mass air flow sensor) in the intake hose to throttle body, remove it, and spray it clean with Tuner spray cleaner, or electrical spray cleaner from radio shack or similar store, and then try it. ...

...remove from vehicle and go to any auto parts store and buy a can of maff sensor spray. be very carefull not to touch inside of sensor, the best way to do it is to place on a clean rag and then clean ...

...MAF sensor, Mass air flow sensor, it is located on the front of the intake manifold all the air that goes into the engine has to go threw the sensor. and it can make the truck stall. if you remove it ...

...remove and clean maf sensor, you can buy maf sensor cleaner at any auto parts store. there are many things that cause this ,so it is hard to tell the exact problm. but if the maf sensor is dirty it ...

Question about 2005 Canyon

1 Answer

...MAF sensor connector. Remove air ducting with resonator. [There will be another line connected to the resonator in back, it goes to the valve cover vent. Make sure not to lose it!! It is 1/2 rubber ...

...I performed a leak down test and the fuel pressure holds at 60psi. The air filter is clean. I removed the plenum and checked the spider injector for leaks and also checked the fuel pressure ...

Question about 1998 Jimmy

1 Answer

...for pin assignment is necessary). Ref. value: 0-5V • Check the connection cables between the removed control unit connector and sensor connector for transmission (circuit diagram for pin ...

Question about 2003 Yukon Denali

1 Answer

...work you can remove the MAF and clean it with a MAF Sensor approved spray cleaner. If you use the wrong cleaner you will destroy the MAF. If cleaning the MAF don't work, then replacement is

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Envoy
2004 GMC Envoy

2,225 Questions

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...