Questions & Answers for: Pontiac Grand Prix remove lock

...lock cylinder. Remove the ignition switch bracket bolts and remove the ignition switch through the instrument panel cluster opening. Remove the bolts retaining the ignition switch to the bracket and ...

...remove the lock assy. so top plastic cover can be removed if you want to remove the plastic cover, look for some screws from the bottom part of that plastic cover. there are about 4 screws. you ,may ...

Remove the ignition key from the ignition lock cylinder.  Close all of the vehicle's doors.  Remove the MALL PGM fuse from the fuse panel. Refer to Electronic Diagnosis in Body and Chassis.&

remove the lock cylinder retaining screw, and remove the lock cylinder. Remove the dimmer switch nut/bolt, the dimmer switch, and the actuator rod. Remove the dimmer switch mounting stud (the mounting

...Remove the ignition key from the ignition lock cylinder. Close all of the vehicle's doors. Remove the MALL PGM fuse from the fuse panel. Refer to Electronic Diagnosis in Body and Chassis. Turn the ...

...the slot on the upper side of the door handle cylinder housing.  Depress and hold the lock cylinder retainer while rotating the key further clockwise to the stop.4. Pull to remove lock ...

remove them one at a time.Installation is same as reverse, except you have to fill the reservoir and bleed the system by running the car and turning wheel lock to lock repeatedly and check fluid level

remove them one at a time.Installation is same as reverse, except you have to fill the reservoir and bleed the system by running the car and turning wheel lock to lock repeatedly and check fluid level

how too remove ignition cylinder lock You have to remove the steering wheel and the turn sig. switch to gain access to the retaining screw located just above the lock cyl.

...Remove the ignition key from the ignition lock cylinder. Close all of the vehicle's doors. Remove the MALL PGM fuse from the fuse panel. Refer to Electronic Diagnosis in Body and Chassis. Turn the ...