Questions & Answers for: Chevrolet Monte Carlo remove lock

...Is the steering column locked? If so try jiggling steering wheel back and forth while trying to remove key. It could be the locking pin in the column preventing the key from being turned far ...

cover , remove the pinion shaft lock screw , and pinion shaft , push axel(s) inward and remove the C lock(s) ? at that point remove axel by sliding axel out . if thats a fix ya , please vote , thanks

...for examination and repair. In answering, please indicate whether or not the window race must be removed for adequate access in removing and replacing the door latch. well with your engineering ...

...lock Well, You will have to disassemble the steering column and remove yours key cylinder and have a new one made by GM . The cylinder is where you put your key in to start. That part has become ...

...switch to get enough slack to clear the steering column. 4 remove the lock cylinder retaining bolt then slide the lock out. slide the new lock in replace the retaining bolt and reassemble the

...lock and unlock on their own while car is runnning and off I have a 97 Monte Carlo that has locked me out a number of times. I have never experienced the trunk doing it's own thing. What I have ...

...lock cylinder in my 99 Monte Carlo? You will have to remove all the cowlings from the steering column to access the ignition lock and switch. With the correct key inserted and selected to, probably, ...

...remove the key cyclinder? The 3 wire lead that goes to the lock does not want to releace when pushing in the locking tabs i am worried that i may break something if i pull any harder. I there ...

turning the booster counterclockwise with a wrench (1) on the J 22805-01. Notice: Do not attempt to remove the booster until pushrod is disconnected from the brake pedal

...lock cable. Remove the park/lock cable from the ignition switch by pulling on the cable. Important: You cannot remove the Passlock(TM) electrical connector until the lock cylinder is removed 9. ...