Questions & Answers for: Pontiac remove lock

...remove the lock assy. so top plastic cover can be removed if you want to remove the plastic cover, look for some screws from the bottom part of that plastic cover. there are about 4 screws. you ,may ...

lock I need to remove the trunk lock on my 98 sunfirs to have it rekeyed open trunk look on inside of trunk lid where lock is .you will see a clip ,just slide off clip remove lock

...remove lock cylinder. INSTALL Lock cylinder to housing assembly. CAUTION : Rotate the lock cylinder to the "RUN" position. Depress the lock cylinder button. Gently push the lock cylinder into place ...

...remove the key lock cylinder It is easy if you have the tools. you need a steering wheel puller and a spring compressor for the plate under the wheel. a bunch of screws and turn signal switch and ...

remove the lock cylinder retaining screw, and remove the lock cylinder. Remove the dimmer switch nut/bolt, the dimmer switch, and the actuator rod. Remove the dimmer switch mounting stud (the mounting

lock module assembly. Remove the key from the steering column lock cylinder set (1). Installation Instructions Insert the key into the steering column lock cylinder set (1). LIne up the locking tab (2

...in ignition what can i do is there any way to take out the cyclinder lock take off steering wheel take off lock plate remove turn signal switch then remove bolt that holds lock in remove lock ...

...Remove the lock cylinder by pushing against the locking button on the back of the bearing/housing assembly, and pulling outward. To install: Install he new lock cylinder into the housing. Gently push ...

...the slot on the upper side of the door handle cylinder housing.  Depress and hold the lock cylinder retainer while rotating the key further clockwise to the stop.4. Pull to remove lock ...

lock cylinder to the RUN position. Remove the ignition lock cylinder from the lock module assembly by pulling the ignition lock cylinder away from the steering column. There may be a video on youtube