Questions & Answers for: Buick remove lock

Question about 1993 LeSabre

1 Answer

...remove lock plate, the snap ring is kinda hard to get off Remove plates and spring behind lock plate Put turn signal switch to the turn right position remove three screws holding in turn signal cam ...

Ad

...remove the snap ring holding the lock plate down, and lock plate spring. You will then need to remove the blinker multi function switch. You will then have access to the bolt holding in the ignition ...

Ad

Question about 1999 Regal

1 Answer

lock cylinder and remove the key. | (Do not turn the ignition key in the lock cylinder.) 6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in

...Remove the ignition key from the ignition lock cylinder. Close all of the vehicle's doors. Press and HOLD the door "LOCK" switch to the "Unlock" position. Insert and remove the ignition key twice ...

...remove the lock set. If equipped, detach the pass key connector. To install: Install the lock cylinder, attach the pass key connector (if equipped), then tighten the lock-to-steering column screw to ...

Question about 1993 Regal

1 Answer

remove the lock cylinder retaining screw, and remove the lock cylinder. Remove the dimmer switch nut/bolt, the dimmer switch, and the actuator rod. Remove the dimmer switch mounting stud (the mounting

Question about 2004 Rendezvous

1 Answer

...LOCK . Remove the console accessory wiring junction block access hole cover. Remove the "AIR BAG" or "SIR" fuse from the block, as applicable. Remove the left-hand sound insulator, for access to the ...

...the steering wheel (need steering wheel puller. remove lock plate (need lock plate removal tool) under the lock plate is the switch it kind of looks like a horse shoe with many wires going to

...lock solenoids are connected to the door lock by linkage inside the door. That's the best place for them. You have to remove the door handle and window crank then remove the door panel to get to

...locks have a holding mechanism at the bottom edge of the trunk lid. Open lid, look at bottom edge. If you see a plate held in with two screws, remove screws, pry plate down to release lock

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

2002 Buick Rendezvous
2002 Buick Rendezvous

1,091 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...