Questions & Answers for: remove lock

Ad

Question about 1989 Celebrity

1 Answer

...lock to remove buzzer switch. On 1991-92 models, switch and spring clip are one assembly. Turn lock cylinder to Run position on 1989 models or Lock position on 1990-92 models, then remove lock ...

Ad

...Remove the anti-lock brake sensor harness from the brake hose clips. Remove the anti-lock brake sensor. Remove the anti-lock brake sensor clip. Remove the anti-lock brake sensor. NOTE: Make sure the ...

Ad

...lock. Remove the shaft lock retainer, the compressor tool and the steering shaft lock. Remove the turn signal canceling cam assembly. Put the turn signal switch in the "N" position and remove the ...

Question about 1991 Corolla

1 Answer

...Remove the lock knob and the child protector lock lever knob. Remove the lock assembly retaining screws and remove the door lock. If equipped with power locks, disconnect the electrical harness. To ...

...remove the lock cylinder. To install: Align the marks on the sector gears and install the gears and the backing plate to the lock module assembly. Install the lock cylinder set and ensure that the ...

...Remove all burrs in and around lock module assembly (15) and lock cylinder (17). From inside module assembly (15) push on locking tab and pull lock cylinder (17) from lock module assembly (15) and ...

Question about 1995 F150 Styleside Regular Cab

2 Answers

...lock. Remove the shaft lock retainer, the compressor tool and the steering shaft lock. Remove the turn signal canceling cam assembly. Put the turn signal switch in the "N" position and remove the ...

Question about 1995 F150 Styleside Regular Cab

1 Answer

...lock assembly. Remove the ignition switch mounting screws and the ignition switch from the steering column. Ignition switch removal/installation To Install: Install the ignition switch on the lock ...

...Remove lock motor assembly from door. To install, reverse removal procedure. Fig. Removing door lock actuator Sedan Remove the door window glass Detach the interior door handle. Detach the actuator ...

Remove the lock plate from the shaft. Fig. Fig. 4: Lock lever plate removal Unfasten the 2 retaining screws and lift the lock lever guide plate to expose the lock cylinder release hole. Insert the key

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...