Questions & Answers for: remove lid

remove lid for cleaning Booklet says remove lid before cleaning, but doesn't say how to remove it. Please help! With lid in open position just pull it straight up and off. http://www.rivalproducts.com

remove the lid to get rid of the rust. I have removed the screws that hold the pins to keep the lid from going back futher but still can't see how to remove it from the washer. Please help. Top loader

Remove lid of top loading washing machine Kenmore 110.92575110 How do I take the lid off? It looks like there are four screws, two each side, but the rear two are blocked by the control console. There

...remove the lid for cleaning or otherwise, tilt the lid at a 45-degree angle and pull it towards the front of the machine. To put the lid back, simply reverse these directions. CAUTION: Make sure that ...

...Remove the lid switch mounting screws, disconnect ground wire and remove lid switch assembly. Compare old switch to the new one. If the plastic sleeve of the new switch is longer, break off at the ...

...lid. 2. Remove the rear compartment lid trim. 3. Pull back on rear compartment trim panel. 4. Disconnect the backup lamp connector (5) from the rear compartment lid wiring harness. 5. Press the ...

...lid. Remove the high mounted stoplamp and place it face down on a clean protective surface. Rear Compartment Lid Inner Panel Trim Replacement Removal Procedure Open the rear compartment lid. Remove ...

Need to remove lid Bread stuck to lid, need to clean the lid. Need to remove the lid to clean it. If you have the kind of lid that has the slots on the back this video will help

remove washer lid to replace lid lock washer has a liod lock when washing i need to know how to remove top to replace lid lock switch on crosley washer modelcaw9244x02 Remove power to the unit. Locate

...lid. Remove the rear compartment pull down stap. Remove the fastener securing the rear compartment release handle escutcheon. Remove the rear compartment release handle escutcheon. Remove the push-in ...