Questions & Answers for: GMC Suburban remove a key tumbler

Key stays in ignition and will not turn off engine I have a 1991 Suburban 2500 4wd with a 350. After I turn on the ignition I can't shut off the engine or remove the keys. I can't turn the ignition ...

key won't turn, how do you remove switch from 1986 gmc suburban? lok for a small hole on the key ring if there is no hole the steering wheel has to come off and a screw has to be taken out for the ...

...remove the door panel to replace the actuators. I have done this twice and both times have only gotten about three weeks before a lock up seizure. It is unsafe for my kids as the key fob, the key or ...

...remove key wait 10 seconds repeat this a total of 3 times. If that dont work try a different key do the same thing. This relearns your key to the ignition it started with Gm cars and trucks from 1999 ...

key for a few seconds, fuel should come out pretty good. To check spark, remove one spark plug wire, put within 1/4 inch of some metal around engine (I don't recommend holding on to it) Try key again,

...key (ignition) tumblers 4 times and the ignition module in the column twice. The last time was 2 months ago before tonight. Remove the lower steering column cover and check to see if the rod from the ...

...remove covers surrounding the cylinder then open the key to position 2 ,1 click under the cylinder there is a little metal tab ..you will need to push it in while pulling lightly on the key and the ...

Remove ignition lock to switch link 1995 suburban The ignition lock assembly contains two components: a lock cylinder to deter theft and an electrical portion that supplies power to electrical ...

The rear fan continued to run after the key was removed from the ignition. I verified the fan switch was in the off position both front and rear control modes. Killed the battery sounds like a bad ...

...remove it without the key? Seems strange to me as surely you would only replace the ignition lock if you had lost or broken the original key. Thanks A key code is stamped on the lock cylinder to aid ...