key tumbler assembly(NAPA Echlin part), relay at fuse block in engine area a checks OK with VOM meter, next item is neutral safety switch that also runs backup lights. I've opened area by removing air
...remove the tumbler to fix it? try this, put the key in and turn slowlyat the same time turn the steering wheel left to right and do this several times. this may get the tumblers to drop like they ...
you have another key to try,you can wiggle the key going in up and down a little then respray then rekey ,you'll see alot of black residue coming out when you remove the key,just wipe it off each time
...Key Is Turned.This Will Release The Tumbler From The Switch So The Tumbler Can Be Pulled Free. Then Unplug The Wires And Remove The Old Switch. A Steering Column-mounted Ignition Switch Is Separated ...
...remove in holes in the lower piece. Turn the ignition key to the Run position. Insert a small tip screwdriver in the access hole on the bottom of the housing to push the spring-loaded tab which will ...
...tumbler if there is pressure on it ( i.e. the wheels are not straight when the key is removed).Put your key in the ignition and turn the steering wheel slightly left or right to release the locking ...
Usually answered in minutes!
2,271 Questions
1,496 Questions
1,337 Questions
1,299 Questions
1,150 Questions