...key to remove the tumbler once tumbler is out shift to 1 and tae cover off remove 2 tork screws holding switch on and disconnect connectors reverse order for installation let me know how you make ...
...turn it forward one click then take something that will fit in the pin hole and push in and pull out on the key this should remove the tumbler then follow the directions on the new tumbler to put it ...
Question about 1994 Explorer Limited
key in the ignition. so I want to remove and replace all the locks including the ignition key tumbler. i could not figure out how to get the ignition tumbler to release, please is there anyone who can
...remove in holes in the lower piece. Turn the ignition key to the Run position. Insert a small tip screwdriver in the access hole on the bottom of the housing to push the spring-loaded tab which will ...
remove broken key from gm ignition lock key is broken off half in cly. Physically removing a piece of an ignition key from the tumbler is practically impossible. The tumbler is filled with spring ...
...key does not turn and I need to know how to remove the lock tumbler, I have removed the bottom dash and cover but am unable to figure out how to the rest If the key does not turn at all in the ...
...remove the steering collom shroud and with key in the lock turn to the first click you will find a resested pin in the uuter housing depress the pin and the barrel/ tumbler can be wiht drawn with the ...
...remove key tumbler you need a special tool (which can be easily made in a w/shop) but still need the key to turn tumbler to position 2 to insert tools to remove the tumbler. Than remove the cover ...
...it will not even turn to pos 2 I suggest a locksmith be called in to remove the barrel he will be able to supply a new barrel and cut the key to suit what you have and set the tumblers to the new ...
Usually answered in minutes!
360 Questions
288 Questions
312 Questions
218 Questions
215 Questions