Questions & Answers for: Buick remove instrument panel

...Remove the instrument panel pad: Carefully pry the speaker grilles and disconnect the Daytime Running Lamp sensor if equipped. Remove the screw under each speaker grille. Remove the screws at the ...

Instrument Panel, Gages and Console. Disconnect the electrical connector (1) from the blower motor.Disconnect the blower ventilation tube (2) from the module. Remove the blower motor screws (1).Remove

...Remove the instrument cluster trim plate by unfastening the retaining screws or simply unsnapping it. If necessary, remove the air outlet trim plate. If may be secured with screws/bolts or clips. If ...

remove the instrument panel trim plate. Remove the passenger inflator module. Remove the knee bolster/deflector. Place a protective cloth on the steering column to avoid scratching. Lower the steering

Remove the instrument panel cluster trim plate using the following procedure: Remove the instrument panel access hole covers from the instrument panel using a small flat-bladed tool. Remove the screws

...Remove the instrument panel compartment. Remove the right sound insulator. Remove the dash integration module from the bracket. Remove the 2 dash integration module bracket fasteners and position the ...

...remove the instrument panel assy and replace the bulb from the back. It's not fun and it's not easy. remove the screws that are on the underside top of dash that surrounds instrument panel. pull the ...

...Remove the instrument cluster trim plate, using the following as a guide: Remove the instrument panel access hole covers from the instrument panel using a small flat-bladed tool. Remove the screws ...

...Remove the LH instrument panel (IP) insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console. Remove the steering column filler panel. Refer to Steering ...

...Remove the instrument panel and center console to access the heater core. Disconnect the heater hoses from the core and remove the mounting bolts or screws that hold the core in place. Carefully ...