will find bolts in the defrost air vents and under any speaker covers. also in the glove box. make things easy and remove the windshield first. can be done with the windshield in place but much harder
1986 chevrolet celebrity are the horn and dome light on same fuse, if so, what title is it under no the horn and dome light are on their own circuit with there own fuse the horn is a (red) and the ...
how to remove a glove box release on a chevy pickup 1986 with the door half open press on the two arms if that don't work remove the mounting screws
antifreeze leaking into cab under glove comp. antifreeze leaking into cab under glove comp. Over heating. 1984 chevy pickup C10, 2 wheel, 5.0 eng. If heater core, how to repair it? heater hose or ...
...compartment seems to be hooked at the lower area by floor. Lift the carpet ,on the floor between the seats to locate 2 more bolts. When removed the cover is kinda hard to remove.Lift bottom of cover ...
i want to remove the dash on my 96 chevy s10 pickup so i can change out the heater core re-think that? remove glove box first and look again
remove glove box latch from 91 blazer Horseshoe-shaped clip on the inside of the glovebox door holds the lock in place.
...blower in my 1990 Chrysler New Yorker Salon? It should be on the passenger side, inside the car, right behind the glove compartment. Need to remove the glove compartment in order to get to the ...
...compartment. 4 Lift the front of your Chevy model to reach the sensor you need to change, if necessary. Use a floor jack and two jack stands to support it. 5 Remove the oxygen sensor using a box-end ...
Question about 1984 Chevy
where is the tcm located in a 1995 chevy 2500 turbo diesel.i cannot find it. T.C.M. MODULE & WIRING HARNESS is behind glove box, here is a link showing what it looks like. ...
Usually answered in minutes!
363 Questions
210 Questions
125 Questions