Questions & Answers for: how to remove footpeg

remove the right footpeg post from the side engine cover even though I have removed the cotter pin. It looks like the post should pull right out of the side cover now but won't. I don't see any nut on

remove front right hand foot peg of a 2007 yamaha R6 the foot peg will have a pin going through it to attack it to the rear set and on the underside of the foot peg on the bottom of the pin there is a

...a washer at one end - how do you get the washer off to remove the bolt and get the footpeg off? That isn't a washer, its a "c" clip, use a flat blade screwdriver and pop it off then slide the pin

...peg shaft of loose how do I tighten it Hi Anonymous, you have to remove the three sproket cover bolts/screws then remove the sproket cover to gain access to the footpeg support shaft nut. Good

...remove the standard passenger footpeg on a 2010 heritage softail so i can install new footboards? Hi Mark_tully, please visit the websites below and good luck: ...

...the left rear footpeg mount are two plugs, remove them and the old oil will drain out. The oil filter is mounted near the lower front of the motor, and just twists off. Replace filter, add oil,

remove the bolt the existing peg hinges on. You should be able to take just the footpeg off the support from the frame. It may not be a bolt but a pin with a circular clip on the other side. Good Luck

can the mounting brackets for the passenger footpegs be easily removed from a 2002 Harley Road King? Hi Matthewguill, for more information on your question please visit the websites below and good ...

how to remove passenger footpegs and install footboards Hi Anonymous, please visit the website below and good luck: http://www.harley-davidson.com/app-content/service/isheets/-J03048.PDF

...depends on what year it is an early model should only have one bolt later models you might have to remove the ...