Questions & Answers for: how to remove exhaust

Question about 1995 Pathfinder

1 Answer

...Remove exhaust manifold heat insulater. Remove fuel tube retainer bolt. only 4wd Remove FR R.H wheel. Remove FR R.H splash guard. Remove exhaust manifold heat insulater. Remove exhaust manifold. ...

Ad

...Remove the exhaust crossover heat shield bolts. Remove the exhaust crossover heat shield. Remove the exhaust crossover pipe studs/nuts. Remove the exhaust crossover pipe.Remove the air cleaner and ...

Ad

Question about 1996 F250 Crew Cab

2 Answers

...Remove attaching bolts and exhaust manifold (9431). Inspect joint faces for signs of exhaust leaks, cracks or any defect that would make the exhaust manifold unfit for use. Installation Clean mating ...

...Remove or disconnect the following: Negative battery cable Heat shields Lower splash shields Exhaust front pipes Secondary air tubes Exhaust Gas Recirculation (EGR) tube Exhaust manifold To install: ...

...Remove exhaust pipe from the exhaust manifold. Lower the vehicle. Remove the exhaust manifold mounting nuts from the cylinder head. Remove the exhaust manifold. Clean the mating surfaces. Check for ...

...those 2 15mm screws you can pull the exhaust pipe down, remove the old exhaust flange and put the new one on. Rettach the exhaust manifold to pipe screws, and reattach the bracket and youre

Question about 2002 Rendezvous

1 Answer

...Remove the exhaust crossover heat shield bolts. 7. Remove the exhaust crossover heat shield. 8. Remove the exhaust crossover pipe studs/nuts. 9. Remove the exhaust crossover pipe. INSTALLATION ...

Question about 2002 Rendezvous

1 Answer

...remove the (B) exhaust manifold heat shield. Remove the four exhaust manifold to three way catalytic converter (TWC) nuts. Raise and support the vehicle; refer to Section 100-02 . Disconnect the ...

...remove the exhaust manifold brace. Leave the lower radiator hose attached and pull down on the outlet pipe to remove it from the water pump.Carefully lower the vehicle.Remove the exhaust manifold, ...

Question about 1991 Grand Am

1 Answer

...Remove Exhaust Remove the whole exhaust from the bike. Step 2 - Drill Out the Baffle With a ½" hole saw and a handheld drill, insert them into a hole in the exhaust's outlet. The handheld drill will ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...