how to remove door panel of gmc sierra http://www.gm-trucks.com/forums/index.php?showtopic=69225&st=0&p=508856
door sill plate. 2. Remove the appropriate side hinge pillar panel. 3. Locate the IP harness to inflatable restraint module yellow 4-way connector C221 or C222. 4. Inspect the IP harness to inflatable
...Remove the door trim panel. Refer to the illustration for the mounting screw and lock tab locations. After detaching the hardware, carefully pull it away, then lift it off the door just far enough to ...
...remove the door panel to find it. The wire is dark green and purple. Splice into that wire and ground it to the chassis and the alarm should no longer work. It's when the security light starts ...
...remove the door panel to see what color the speaker wires are in order to trace them. Also, the insulation on the damaged wire may not be broken, just the wire inside. If you can't locate the ...
Question about 2008 Sierra 1500
...Remove the appropriate side door sill plate. <LI type=1>Remove the appropriate side hinge pillar panel. <LI type=1>Locate the IP harness to inflatable restraint module yellow 4-way ...
Question about 2008 Sierra 1500
...is no resistance. Seems like its locked from the outside eventhogh I unlocked it. Had the same problem , had to take the seat out to remove door panel . The strike and latch both had to be ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions