Question about WS-73905 73" Rear Projection Television
...Mitsubishi WS-65511 TV and a Mitsubishi DD-8030 DVD player. We just moved and when I set up the TV / DVD player I followed the connection instructions in both the TV and DVD manuals and the red / ...
...mitsubishi projection. It seems when my house is below 70 degrees my tv will not turn on for hours. Is there a way to speed up this process? that model has some bad capacitors that will cause this. ...
...picture, color distortion that happened to me and i just gently hit it on the top and it fixed itself wdweber, Its usualy convergence problem and needs to look dry solder joints in convergence
Question about WS-65513 65" Rear Projection HDTV
...convergence on rear projection WS-73905 73 in PICTURE HAS BLUE / YELLOW OUTLINE ON EVERYTHING. BLUE + WILL NOT MOVE VERTICALLY UP OR DOWN, CURRENTLY STUCK BELOW ABOUT ONE EIGHTH OF AN INCH . In order ...
Question about WS-73905 73" Rear Projection Television
TV green light turns on. YOu could hear the audio out of the receiver which is connected to DirecTV. But, no video. Hi, Look for bulging capasitors on the DM module board located to the left from the ...
Question about WS-55819 55" Rear Projection Television
...convergence board WS-55819 I have a Mitsubishi WS-55819 and I can not align red even though convergence board was replaced. Trying through advanced options or resetting to factory defaults does not ...
Question about WS-65907 65" Rear Projection Television
...board and had convergence ICs professionally re-soldered. Put board back in and now tv will not power on. No blinding green light or anything. What can I do. Your post is showing 2 different model # ...
While watching TV the picture went out completely, however it still has the sound. Possibly a regulator, located at rhs of signal board at back of set. Look for discoloration at the regulator there.
...convergence board it is dead.This convergence board must require to be replace 2 STK convergence ICS and some or all of it resistors too on the convergence board too.To fixed the tv convergence board ...
have to be canged on convergence board, and you are looking a a repair bill between 300-400, and if it was mine for the year that it is I would not lay any money into it, Just buy a new LCD, take care
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
