...Remove the burner grates. Remove the caps off of the burners. You'll see three screws on each burner, remove these and lift the burner heads out. Now you can lift the cook top up (like lifting the ...
...Remove the grates and burner heat deflectors. There are 4 screws on the knob panel, 2 on the left and 2 on the right. Remove the screws and pull back about a inch or two. I found it helpful to open ...
...burner set, remove burners. Inspect burners for debris in passage and runner slots. Check manifold orifices for blockage (ants?), particularly the one facing burner nearest to ignitor. If debris is ...
remove the burner assembly for cleaning? It does not seem to have any screws for removal from the top. Does the burner assembly remove from the underside of the burners? Or is it possible to clean out
Question about 30400040 Stainless Steel Grill
...burner and remove from grill. Take a moment to inspect the other burners and any other hoses in case you need to replace more than one piece. Place the burner in a plastic bag and take it to the home ...
Question about (5232X-0C1) CD-RW/DVD-ROM (Combo) Burner
remove dvd from burner - appears dvd is corrupt Burned a DVD using DivX and Nero Smart. Tried playing it in the BenQ Internal DVD player burner and the DVD can't be removed now Any ideas how to remove
Question about (5232X-0C1) CD-RW/DVD-ROM (Combo) Burner
burner in place. Remove the pin(s) and carefully lift the burner up and toward the rear of the grill. This will allow the burner to slide off the burner orifice and out of the grill. Before installing
Question about 463254405 All-in-One Grill / Smoker
...burner there is a Cotter Pin. Remove it with a screwdriver of needle nose pliers. Once the pin is removed, lift that burner end up and away from you and the burner will clear the grill. Hope this ...
Question about 463254405 All-in-One Grill / Smoker
...burner farthest from you (It may or may not have a cotter pin holding it in. If it does, remove the cotter pin with a pair of needle nose pliers). As you lift it up, it should pull away from the ...
...remove and reinstall the tube burner. I must have a spider or insect nest in the tube and I would like to clean it out. It has the cross over burner connecting the burner and I am a concerned about ...
Usually answered in minutes!
1,163 Questions
465 Questions
395 Questions
390 Questions
353 Questions