Vtech phone Something wrong with my vtech phone it died so we put it on the hook but it did not flash and it did not charge it what's wrong with it Have you tried removing and replacing the batteries.
Vtech VT 2656 2.4GHz How do you deregister all handsets on a Vtech VT 2656? I have a need to deregister and then rigister my (4) handsets. The current configuration recognizes/identifies only three of
remove battery and wait a couple of minutes. Put battery back in and try it. The other thing I suggest is a new battery or switching it temporarily with a phone that works, to see if that helps before
Question about VT 40-2420 Cordless Expansion Handset (VT40-2420)
...VTech C525". Upon removing the battery, unplugging everything and restting the system, the LED once again read; "VTech C525". How can I setup the 4th handset? The VTech 2431 supports 4 handsets. If ...
...stay charning the phone will not stay charging Just remove the batteries, wait approx. 30 seconds and then re-install. Also, if you have spare batteries in the base, just swap them. Works every
...remove battery for handset. unplug power AND phone line to base unit. wait 15 seconds or more. reinstall battery. plug in power to base. plug in phone line to base. put handset in base charger slot. ...
...or so, then see if it's dry. Before you do it, remove the battery and battery cover from the phone. This will give the moisture somewhere to escape, and reduce your risk of damage to the battery
Question about 5.8 Ghz Handset Cordless Phone System with Digital Answering & Caller ID
...vtech phone (many times) a beeping handset indicates a low battery or an inability to connect to base station. check to make sure the battery is connected correctly and that the phone is setting in ...
Question about 5.8 Ghz Handset Cordless Phone System with Digital Answering & Caller ID
Clear" and click Menu/Select. Press Menu/Select again at "Reg Clear ?" At this point, you'll see an "OK" message. Remove the battery, and plug it back in. You should be at the original Register screen
Question about 5.8 Ghz Handset Cordless Phone System with Digital Answering & Caller ID
...phone CS6709 can only be two things. You activated the MUTE button. The Microphone is broken. Disconnect it from the power outlet, remove the battery and count to 10, replace battery and plug back
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions