how do I remove the towel bar from the wall? My contractor installed a 24" Rockland towel bar. I now want to remove it so that I can paint the wall. I can't find the instructions, and I can't remove ...
Question about YB2818 Eva Towel Bar Bathroom Accessory - Brushed Nickel
Tighten up a loose Moen Eva towel bar wall mounted bracket I have a loose Moen Eva towel bar on the wall involving one of the two mounting brackets. I do not know if there is a male/female bracket ...
...Towel bars usually have a base that attaches to the wall with a screw. To expose the screw, you must loosen and or remove a small screw on the underside of the mounts. Once the screw is exposed just ...
Question about YB2218CH Brantford 18'' Towel Bar In Chrome
My Brantford towel bar is loose. How do I remove My Brantford towel bar is loose. How do I remove from the mounting posts to tighten? There are some tiny screws under the posts. Loosen them and lift ...
towel bars and hooks from wall. No set screw visible. We did not install them. Newer towel bars don't have set screws... Solution-slide off! There is an opening in the bottom of the bracket. Slide
I'm having trouble removing my Moen towel bar to paint my bathroom. Is there a special tool needed to remove it? Please help. First off you need to pry off the cap thats facing you (most models). Then
...Here are a couple of videos which should help you undesrtand how towel bars are installed. Hope this is helpful. (do not delete) Here is a couple of videos that should help understand how towel ...
Question about YB8086 Mason Towel Ring Bathroom Accessory Chrome
I need to remove a Moen towel bar. It has a tab under the bottom but I dont know what to do There should be a "set-screw" (a very small screw) at the bottom of base (fat part) of the towel bar. It ...
how do i remove a towel bar that does not have a set screw on the flange cover? I think you grab hold of the rosette closest to the wall and spin it off, it should expose the set screw. If that isn't ...
...towel bars and it says very specifically that the posts snap or click into place on the mounting hardware...it also refers to a square hole located on the underside of the post. perhaps we are meant ...
Usually answered in minutes!
350 Questions
260 Questions
250 Questions
168 Questions
217 Questions