Questions & Answers for: remote wiring

remote wire.the amp works fine in my girlfriends car,and I have switched the reciever.All wiring is correct,and Im not a complete idiot. am I ? Dont answer that but please help with the other question

...cd player. bass is heard when radio playing. can you help. it seems like you connected the wrong remote wire to the amp. Alpine has two remote wires. BLUE (only) This is the pwr antenna remote

remote wire The amps stay on when I turn the car off and also they cut off when I unplug them from the remote wire You have the REMOTE wire hooked to a constant +12V source. The remote wire is ...

Hampton Bay ceiling fan remote control THe remote works for the fan perfectly but not the lights i have a problem with remote ceailing fan and light i tried push on light key - dim light low to high ...

wiring this fan to work without the remote? What is the sequence these need to be connected? If you hook it up this way though, are you still able to control the speed of the fan and the brightness of

Remote wire? I need to connect a "remote" wire from my JVC KD-G441 headunit, to my amp in the back. But I don't know where the remote cable should be drawn from, on the headunit. There is no remote ...

Wiring instructions are terrible. Ceiling wires = Red, Black, White, Copper. Fan wires = Black, White, Copper. Remote wires = Neutral in(Black), Live In(Black), Light out(White), Fan out(White), ...

cant get sound in dvd mode only in radio mode PS: Check if you car has remote wire or anterna wire. Details below. A relatively common problem is installing an amplifier with a factory head unit or ...

...wiring or the remote control is at fault. To rule out the wiring, disconnect the remote control and use a short, good jumper wire and connect directly to the remote terminal on the PCB. If the unit ...

...remote wiring harness on the generator. This will be a bundle of wires with a plug on the end. 2. Connect the plug on the end of the remote wiring harness to the receptacle on the generator. 3. ...