Questions & Answers for: remote control won 39 work

...remote control stopped working suddenly, ruled out battery for remote control, because I changed a new one, ruled out circuit since everything is working, I don't have a pull on the ceiling ...

...to reset the switches in the remote but still nothing Check the remote control for its infrared emission.  Check its battery contacts for any rust or dust.  Check it with fresh

control works the 3 speeds on the fan, but the light won't respond. Check the wiring on your receiver to make sure the light wire is connected.You have to have the light on with the pull chain

...won't turn on. Remote and fan tramsmitter settings match. The light on the remote is a battery light. First mistake was buying a store brand fan which are mostly low-end parts. Try adding a ...

...but the fan won't work The light works but the fan won't work Was it an add-on light? If so, pull the light switch once and try the remote again. If not, you probably need a new

...remote. It is twelve years old. why won't my light or ceiling fan come on? I have changed the batteries in the remote. It is twelve years old. We are desperate to find one of these fans..I ...

...remote won't work. The fan is running light is off. Batteries in remote died sometime today. I replaced them but the remote still won't work. Please help. ...

Hunter ceiling fan. Remote control. Lights work, fan won't. Batteries in remote new. If the fan came with a remote you probably need a new receiver. You can order at 1-888-830-1326. Need model #

not, it is an Emerson unit wall switch only not remote control Try pulling the chain once and then try the wall control. Is it a wall REMOTE or dual control? Do you have the number of the wall control

...control the fan and light seperately by only using 1 yellow wire? Because it's a wall remote. Remotes will work fan & light with one hot wire. You should have a receiver in the canopy of the