Question about EASYSHARE Plus Series 3 Thermal Photo Printer
...cleaning the front roller with a damp paper towel fixed it. Wipe it carefully and let it dry before reloading the paper. The rubber on the roller seems to lose it's ability to pick up the paper if it ...
reload the paper. Occasionally the pinch arm will end up in the wrong position due to the printer stopping because the ribbon was empty. The second fix is to check and make sure that the sensor arm is
...then try carefully pulling the paper out. Then swith printer ON and let it sort itself out befor reloading with paper. Some times the printer gets greedy and takes in more then one
Question about ESP 3 Multifunction Printer/ Copier/ Scanner
...Reload the paper tray. Do not exceed the fill line. 5.Re-install the paper tray, then press to resume printing. You can also check this link for other troubleshooting tips that you can do if you have ...
...Reload the paper.Note: If the Paper Jam message still displays on the operator panel, and you are at the end of a paper roll, it is possible that a segment of paper is too short to automatically exit ...
...Reload the paper tray with additional paper from a printer paper kit. Place the new paper below any older paper in the paper tray. Do not load more than 30 sheets of paper. Reinstall the paper tray. ...
...the back off, looked for paper, reset the system by unplugging and even deleted the software and reloaded it into my computer. I have checked everywhere for a jam and even blew it out with air. On ...
paper cleared, ink cartridges and ink carriage removed and cleaned. Printer error 3821 appears on screen. Press OK and screen says please wait and there it stays. Hi, Your error code, 3821, means that
Reload the paper tray, but do not overfill it. 5 Turn the printer on. 6 Press OK. Follow this link to download the manual http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/ESP
Question about EASYSHARE 5300 All-In-One InkJet Printer
...reload it like you're setting it up again the first time: paper, ink, test print. If you still get the error code try cleaning it again but on its side or back and check the print head belt and rail, ...
Usually answered in minutes!
1,024 Questions
996 Questions
1,049 Questions
812 Questions
732 Questions