Questions & Answers for: release bonnet cable broken

there will be a cable you can pull using a gripper and it will release the bonnet, you can easily replace the plastic llever and it's reletively cheap. Hope this helps, please don't forget to rate me

...bonnet release mechanism broken How can I release the bonnet of my 2005 audi a4, now that the release mechanism from inside thew car has broken? This can be over come by getting a pair of vise grips ...

...bonnet release is operated, the cable at the grille end moves in sympathy. The grille end has become disconnected. how do I reconnect the grille end to the release mechanism? you have to release the ...

Release handle in drivers footwell. No resistence is felt. suspected broken cable. Require a method of releasing bonnet catch or gaining access to cable locations . REMOVED PANEL FROM UNDER THE BUMPER

...bonnet release from inside thecar. You then have to get a piece of fairly strong wire(I used a 2.8mm welding rod) and bend a fairly tight hook in one end. Using a torch so you can see the bonnet ...

...bonnet release lever does not release the bonnet. I assume the cable is broken somewhere near the latch, as the cable is still attached to the release lever. How can I open the bonnet? the car is a ...

...bonnet release how to open bonnet i assume you have tried pulling the cable including the outer insulator, then next step is from the front left corner of the bonnet!!:using a long 90 degree needle ...

...release the bonnet on a ford transit 2000 this bonnets cable has broken and i cannot release the bonnet you will have to come up in front of the radiator with a long lever and push the latch lever ...

...rover 75 bonnet! when release handle has broken? release hadle has broken away from the cable that releas`s the bonnet Use pliers and fit new handle and cable. Make sure it works BEFORE closing ...

...bonnet cable can not open bonnet You will need to reach up from underneath and either locate the latch and pull it or grip the cable near the latch and pull that to try and release the bonnet