...relay are good,I by passed harness,(hot wired) pump engine ran strong as ever what is problem ?? on the drivers side left rear frame next to bumper bracket there is a ground for the fuel pump make ...
...is it? the flasher relay is a aluminum cylinder relay on the fuse panel. It's the shiny one. could be the flasher, should be snapped into a bracket behind the panel, which is below the gauge
Question about 1992 S-10
...bracket. If the panel is not visible, check for a removable compartment door or trim panel which may be used on later models to hide the block. where is the relay for the power steering located in ...
...bracket for easier access. I had removed the positive battery cable prior to all this. The only other things I disconnected were the 2 wires going to the alternator. After reassembling everything I ...
relay to activate it. But the oil pressure switch also is part of the circuit. When the truck has oil pressure the switch will send power to the fuel pump. So even if you had it running with gas being
...bracket.Should be like 4 different relays. Don't forget to press like button I have a GMC Typhoon and the relay is under the hood right above the power brake unit. the pump connection is there ...
Usually answered in minutes!
1,473 Questions
904 Questions
790 Questions
747 Questions
686 Questions
