Questions & Answers for: Dodge relay bracket

...relay heat spark is located? If it's possible send me wire harness diagramm. Sincerely yours, Dmitriy It's located in the engine compartment, attached by a single bracket to the left inner fender ...

Ad

...relay or flasher can be removed by pulling it straight down from the module.""The entire module can be removed by pushing it up-off the mounting bracket-then pulling it down." Well,it's great of them ...

Ad

...relay is solid state, mounted behind the facia on a bracket drivers side, right of left headlamp assembly, feed by fuse 24, 40 amp in the pdc, box, I'm assuming thats what your talking about, the ...

Question about 1999 Caravan

1 Answer

...relay. If your sure then, Here are the steps : -Remove negative(black)battery cable. -Remove plastic cover from transmission that covers the starter /ring gear. -Unbolt starter from engine, and ...

Question about 1994 Dakota Club Cab

1 Answer

some other kind of relay? Thanks, Randy It does sound like the brake light switch has failed. The switch is located on the brake pedal bracket. I have enclosed two pics for your use. I hope this helps

Question about 1991 Daytona

2 Answers

...side of steering column, mounted in relay bracket. The hazard flasher is there also. If your hazards work, turn them on to help you locate both flashers, then replace the one that isn't

...relay bracket, and fastener are used to dissipate heat from the relay. Ensure the relay is properly attached to prevent the following: Intermittent engine overheating. Relay "thermal" shutdown, or ...

Relay On bracket near fuse/relay block. go here for a picture of what this fuse relay block looks like https://www.2carpros.com/questions/1988-dodge-dynasty-turn-signals-aren-t-working-fuse-good-4-way

...bracket), both with same #, and still no go. I'm TOTALLY STUMPED on mine, but yours should work with a functioning relay of proper #. Let me know how it goes. If anyone has suggestions for my related ...

...relay bolted to the car near the wheel well. It measures about 1 1/2 inches across and is about 1/4 inch thick. Severe corrosion or heat damage to the aluminum mounting bracket may be the culprit.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Dodge Caravan
2000 Dodge Caravan

2,271 Questions

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

1999 Dodge Ram
1999 Dodge Ram

1,788 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2005 Dodge Caravan
2005 Dodge Caravan

1,496 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...