Questions & Answers for: Kenmore relax

...can now see down into the sides of the drum where items can easily get caught. Take your time and relax this is not hard to do this task. To re-install simply reverse the directions and tighten the ...

...it may take a couple of cycles for the machine to stop leaking (the seals sometimes need time to relax back to their original shape)

...problem. Thanks in advance for your comments John Dalton Hi!!! Yes its normal dont panic just relax and have a cold soft drink..Nothing is wrong with your frig..Remember defrost cycle is ...

...sound but nothing turns on. Light still works. this is a 4 year old dryer. Should still work Hi!! Relax your thermal fuze has shorted out..replace your thermal fuze and all is fine..Good luck..the ...

...There is no obvious blockage; there seems to be sufficient water pressure. Still, no ice. first off relax and give it time the ice maker need to cool to a certain temp before making any ice, 24 hours ...

...drum pull tensioner to end of travel against spring loop belt around motor pully and tensioner relax tensioner rotate drum by hand to make sure belt wont jump off. Thanks Fame

...rinse, or higher speed cycles. Kenmores and GEs are the highest reported rate of longer times. Relax. The more you add, ie, delicate, two rinses, light spin, medium dry, the longer it will take. ...

...seal to properly seal against the door. If that doesn't help, you may have to get the seal to relax by using a hair dryer to warm up the seal so it relaxes and goes back into shape. Also check ...

THE MOTOR IS WORKING BUT THE AIR COOL IS NOT FLUID TO THE REFRIGERATOR SIDE THE FREEZER IS WORKING GOOD ONLY THE REFRIGERATOR SIDE IS NOT If we don't clean our refrigerator coils with a coil cleaning ...

...of water from the wire and also on the screen /panel then couple it back with care and allow it to relax it self for some time. Please DO NOT APPLY WATER when doing this and also make sure that all ...