Questions & Answers for: Poulan reed valves

...carb while running for those few seconds. Carb has been cleaned and seems to function properly. The reed valve is very stiff and doesn't seem to open to let gas into the engine. The exhust port is ...

...reed valve not sealing off because I see fuel seaping onto the reeds (Poland chainsaw with Warbro) [email protected] No response to clarification. The needle valves are really sensitive If you ...

...reed valves are stuck take off the aircleaner and spray some carb cleaner in the port if you still have problem do it to the exhaust port take off the mufler that will help of they are working put a ...

...don't know much about chain saw motors, if this was a marine 2-cycle outboard I would suspect the reed valve had failed. See no reed valve in the parts list from Poulan. Suspect one of the ...

...got nothing at all. What can cause it to not even try to start? You may have something keeping the reed assembly from closing. This is a check valve that keeps the gas going in one direction... into ...

Where is Reid valve on 36cc Poulan chainsaw I don't know but an intake reed valve is usually fitted directly to the intake port at the base of the cylinder barrel or crankcase and is revealed when the

...checks out with fuel and spark. I think your chainsaw has poor compression. I would inspect the REED Valve first. check exhaust screen --clean it if carboned up also would check ...