Questions & Answers for: Yamaha TT-R 125 LE reed valve

Question about 2003 TT-R 125 LE

1 Answer

How to start my 2003 ttr 125L? put fuel tank valve to "on" pull out choke lever/knob turn out kickstart lever and kick

Ad

Question about 2004 TT-R 125 LE

1 Answer

My sons TR90E has developed a lean miss. I have cleaned the carb and replaced the Air and Idle screws with new sets from Yamaha. I have not been able to adjust out the miss. It developed the miss ...

Ad

my dirt bike quits running as soon as you turn off the choke will not start unless choke is on Remove the water trap bowl at the bottom of the petcock, (gas valve). Is there any water or trash in the ...

my 2005 yamaha125 wont start period its a 4 stroke and im thinking about putting some work into it but i want it to run first Determine if you have fuel delivery issue or spark issue. IF both are good

Question about 2005 TT-R 125 LE

0 Answer

my 2005 yamaha ttr 125 le wont start i got the bike a week ago it had been sitting for a few years. i changed the ignition coil, spark plug, petcok, cleaned the carb, replaced the pilot jet float bowl

...reed valve between the carb and cylinder it's a 2T if the tach redlines above 10K it's a 2T then there is always the VIN # from the info above that bike is a 4T for this scenario you will need your ...

Question about 2005 TT-R 125 LE

1 Answer

when you get it out) it will allow too much fuel/air into the engine. The reed valve(s) are located between the carburetor and the engine. The individual reeds are available as well as the entire unit

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...