Questions & Answers for: Suzuki RM 250 reed valve

...and backfires I have a 1980 rm 250. I have rebult the moter. parts wiseco poiston .40 over boysen reedvalves and gaskets. I have to put gass down the sparke plug and it might start no idel just

Ad

at first gas would just start pouring out of the overflows when i turn the gas on. i cleaned the carb everything looks good and now the bowl fills with gas(i know this bc i removed drain plug from ...

Ad

reed valves,spark plug and cleened the carby out after it just died, it went 4 a half hour & ended with a back fire. now when i try 2 start it she back fires & the oil looks milky how do i fix

Question about 2003 RM 250

1 Answer

how do I take out the reeds? You remove the carburetor and then the rubber intake tube the carb was plugged into. Reeds are inside. If you have an older model you may have to remove the cylinder.

bike boggs down no powerband rm 250 bike starts fine first kick every time but when i ride it it wont hit power band, it starts to then just boggs down i have a 92 rm 250 an i just had it fully ...

I need the head ang cilinder torque specs for a I need the head, cilinder, reed cage and spark plug torque specs for a 1982 rm 250 you can call the Suzuki dealer for the specs and/or buy a tech manual

Question about 2005 RM 250

1 Answer

my suzuki rm 250 starts and runs for a few seconds then stops . I have taken carb of and cleaned it out and seems to be fine. there is also a really good spark from plug. First up, check all ...

...running fine but it wont go into the band If you are referring to the power band,this is when your reed valves open.Check for cracked or damaged reeds.You need to remove carb and reeds are between ...

what is the fuel mixture for a rm250 1993 suzuki please could some one let me know thanks wwe were told that a 100ml to 5 litres is that correct Never Mix That Much Fuel At One Time. Mix 2 GALS. At ...

Question about 2003 RM 250

1 Answer

timing?????? need step by step on how to set the timing. and is their another timing besides the ignition timing? You Did Not Indicate If The RM Is A 2 Stroke. If So The Timing Is Not Adjustable. If ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...