Questions & Answers for: kawasaki KDX 200 reed valve

KDX200 carb float set up. Hi I have gas coming KDX200 carb float set up. Hi I have gas coming out of the float chamber overflow so obviously need to set the floats but would like to know how to do it ...

Ad

jerking, not holding idol and comeing off the ground in all gears I have a Kawasaki 200 KDX enduro we were told it was a 1985 and I was running great all of a sudden it won't hold an idol and you have

Ad

kdx 200 running lean or rich no not know. you know how a 2 stroke will clear up and really go when you are in the power band, well mine will not stay cleared up in its power band, I have cleaned the ...

Question about 1998 KDX 200

1 Answer

power valve problem no top end power . need diagrams of tear down. take your pipe off and see if you can see the valve opening and closing when you twist the throttle. Most likely its time for a top ...

reed or something, but at the time I didn't notice the major fuel leak. If I crimp the line that's leaking, then it begins leaking from another, so I tried crimping both lines, then it went to the 3rd

Question about 1998 KDX 200

1 Answer

seems like oil is getting to carb wont rev out starts just fine. wont hit power band. manual says starter valve could be stuck open. can not figure this out try cleaning, or replacing your spark plug.

the bike wont start up. it has a spark and has good compresion. what could it be. It could be timing or fuel.Your next move is to make sure your getting gas.try to start bike with throttle wide ...

I dropped my bike while it was running in my front yard. Now it is running rough and the oil pressure light is staying on, valves are loud, and lose of power. I think there is air in the valves. any ...

i have a 1998 kdx 200 the bike idles fine very crisp throttle When i rock the bike or move sideways or when rideing down a steep hill the bike boggs down it will stall if you let it I changed the ...

how to fully open power valve kdx 200 which way does it turn clockwise or anticlock wise I have answered your other question you posted

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...