...cord.4 Remove the screws from the console hood and remove the hood.5 Turn the pulley until the reed switch and magnet are aligned with a 1/8-inch gap between reed switch and pulley.6 Replace the ...
...replace them. If this does not work or your console does not require batteries, check the reed switch or optic sensor. Reed Switch: Unplug the treadmill and remove the motor hood cover. The ...
...replace them. If this does not work or your console does not require batteries, check the reed switch or optic sensor. Reed Switch: Unplug the treadmill and remove the motor hood cover. The ...
...replace them. If this does not work or your console does not require batteries, check the reed switch or optic sensor. Reed Switch: Unplug the treadmill and remove the motor hood cover. The ...
Question about 450 Mx Treadmill
need large picture of reed switch under hood. can't locate with printed instructions speed moves up only-not down and incline stuck at 2-does not move up or down. i would like an enlarged diagram of ...
Question about 450 Mx Treadmill
...you insert the magnetic key the console lights up but none of the buttons do anything 1) Adjust the REED switch,clean, and tigh the connector wires.see the diagram attached.2) See inside for any fuse ...
console epic 550 treadmill not lighting up adjust the REED swtich, test it for open or faulty, clean it , and tight the plug very well. see the diagram attached. Plug the ribbon cable for keypads very
I have an Epic View 550 and it will not turn on. I have tried to reset and check the reed switch and optic sensor. It comes on all zero's and then displays FF in the calorie field. Any help? see the ...
...lower connectors and clean it. 2) tight the ribbon cable inside from display board. 3) adjust the reed swith, see the diagram attached. 4) test the power supply for display board +5 or 12vdc God ...
Question about View 550 Treadmill
...ve got an EPIC 400 MX treadmill and the speed doesn't start, the incline works ok. I've checked the reed switch and it's working fine. Could it be the keypad. If you wish to get some details about ...
Usually answered in minutes!
122 Questions
67 Questions
16 Questions
20 Questions
11 Questions