...power, it seems to be OK, but I run EVERYTHING through my receiver (Sat, DVD, VCR {yeah I still have one}, XBox, etc.). When it won't turn on, neither will anything else!! Thanks for your help. RE ...
...receiver was shut down and could not power up thereafter. When the power button is pressed a double clicking noise is heard and the receiver will not turn on. I checked the impedence level and it was ...
Question about TX-SR605 Receiver
...receiver won't turn on. When I power it, it just keeps clicking. Any suggestions. I don't think there is warranty, bought at auction Here are your options: 1. An electrical problem, where your ...
...receiver power issues Welcomejee, Continuing our discusion. The issues are as follows: When I first plug in the system, it clicks with an audible "click-clunk". Then, when I go to cycle the power on, ...
...receiver. check your power supply to make sure the correct amps and volts are there. check your speakers to verify the correct ohms for the receiver. if the ohms are to big you will shut down because ...
...power button the receiver turns on.then immediately turns off I had this problem also and discovered an easy way to trick it into powering on: Click the power button, then within 1 second of the ...
Question about AVR-2803 Receiver
...power outage my denon 2803 receiver will not turn on. It was hooked up through a Monster box and all other components were ok accept this receiver and another yamaha receiver. Odd that only the ...
power Have this receiver now for 3 plus years. I just installed a new sony pj via hdmi and wonder if my power button is going out. The last 2 weeks when I power on via harmony remote, the cable box, ...
Question about VSX1020K Receiver
POWER OFF message, Pioneer receiver makes clicking sound when plugged to power. Then shows POWER OFF message and turns off and on again by itself and shows the POWER OFF message again and so on and so
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions