about the same time, our cisco 1811 router freezes. After disconnecting the power for 1 minute and rebooting it works fine for another 24 hours.... replace your router, got a problem with the board..
Question about Catalyst 4506-E Cat4500 E-series 6-slot Chassis Fan No PS WS-C4506-E
...cisco.com/en/US/products/hw/routers/ps5199/products_password_recovery09186a0080093e12.shtml for step by step details and more in depth instruction. 1. Reboot 2. Press the "break" button on your ...
Reboot and watch the POST and ASIC tests to see exactly what component is failing. If this device is under SmartNET contract with Cisco, contact them for replacement. If not, you will most likely need
reboot. http://www.cisco.com/en/US/products/hw/switches/ps607/products_tech_note09186a00800c4546.shtml Just follow those steps to reset cisco 3560 switch password to factory defult Step 1: Restart the
...reboot every hour because I lose connection.. try to update the Firmware of the router. You can do this by opening the Cisco Connect Software under all programs. It should ask for an update when it ...
...cisco router is not booting only cursor blinking not going ahead HI, It May be the problem with the IOS in the router Flash Try hard reboot of the router If it is not soled proceed next. while the ...
Question about Catalyst 3750 24 10/100 + 2 SFP Enhanced Multilayer Image (4632080515)
...= 0x00000000 *Mar 1 00:02:32.899: %PLATFORM-1-CRASHED: Contact Cisco support for a replacement. It is not normal for a switch to reboot like that. Cisco switches (not routers)have a lifetime ...
Question about 7945G IP Phone
Cisco IP Phone 7945G keeps rebooting after I did a factory reset. Is there a way to fix this? I did a factory reset on this phone and not it is stuck in reboot mode. I have attempted to do the factory
Cisco IP Phone 7945G I searched around the net for a way to stop my Cisco IP Phone 7945 from rebooting. I tried the factory reset using 123456789*0# and it didn't work. I saw a comment to try ...
...from boot loop? Cisco Phone powered up, then 3 lights on, next - off, cisco logo appears and Phone reboots again.. I think it'was after flashing new firmware. Are you familiar with wireshark ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions